How do I replace the battery in my Toyota key fob?

Toyota key fob battery replacement can be performed by technicians at a certified service center, or you can do it yourself at home in Palatka. The process involves removing the emergency key from new models, prying open the key fob casing with a small object for older models, exposing the battery by lifting the circuit board, noting the battery size and type, and replacing the battery with a new one (usually a CR2032). Finally, snap the key fob casing back together.

What should I do if my Toyota Key Fob is broken?

If your Toyota key fob is broken, you should bring it to Beaver Toyota St. Augustine for diagnosis. Service technicians can either repair it or cut a new key on the spot. If just the casing is broken, a replacement case can be obtained from the parts center.

SAFER DRIVERS SAFER ROADS

You may have heard of Beaver Toyota's Golf Classic for Safe Driving back in March. Beaver Toyota is prepared and excited to partner with Elite Driving School to make our roads a safer place. Thanks to our sponsors and community partners, we will be awarding over 1,000 hours of scholarships for student drivers right here in our community. To apply, please fill out the application below with the student’s information. Ends on May 31, 2024.

Toyota Key Fob Replacement

Q: How do I get a Toyota key replacement?

If your Toyota key fob is damaged beyond repair, a replacement can be obtained for $200 to $350. This includes a new case, circuitry, and emergency key, along with cutting the new key and programming the fob to communicate with your Toyota vehicle.

at Beaver Toyota St. Augustine

(904) 863-8494

Open 8:30 AM - 7 PM

Service Center

Schedule Service

Key Fob Replacement

Has your Toyota key fob become less effective over time at unlocking your Camry or RAV4? The reason may be a dying battery. Replacement of your Toyota key fob battery or Toyota Key fob in a timely manner will prevent problems locking and unlocking your vehicle while you’re out in Jacksonville. Contact a Palm Coast-area Toyota service center as soon as you notice the following telltale signs:

Your Toyota key fob quits working completely.
You need to be very close to your vehicle to unlock the doors.
Your Toyota Key fob doesn’t respond as quickly as it used to.
You need to press the unlock button multiple times before it works.

Toyota key fob battery replacement can be performed by technicians at a certified service center, or you can give it a go yourself at home in Palatka. Here’s how:

1. For new Toyota models, there is a small metal emergency key hidden inside the key fob. Grasp the slot that you’d use to pry open the key fob casing, and pull the emergency key out from the bottom of the Toyota Key fob.

2. For older models, you’ll need a small flathead screwdriver or other small object to pry open the key fob casing.

3. Once the Toyota key fob casing is open, you’re ready for battery replacement. Gently lift the circuit board to expose the battery.

4. Write down the battery size and type and make a note of which side is facing up. Most Toyota key fobs use a CR2032 battery, which you can find at most hardware stores sound St. Augustine for less than $5.

5. Replace the Toyota key fob battery and snap the two halves of the key fob cashing back together.

6. If a dead battery was the cause of your key fob issues, then it should now work flawlessly! If it still won’t work properly, you may need a Toyota key fob replacement instead.

My Toyota Key Fob is Broken — What Should I Do?

How Do I Get a Toyota Key Replacement?